Volume & Issue no: Volume 3, Issue 10, October 2014
_____________________________________________________________________________
Title: |
An Overview of Disarray of cantilever beam bonded with piezoelectric material for energy harvesting application Subjected to single degree of freedom system |
Author Name: |
Yogesh S. Powar, A.M. Naniwadikar |
Abstract: |
ABSTRACT
Abstrac this paper presents an overview of vibration based energy harvesters. The maximum harvesting can be obtained from
the cantilever beam as many researchers done work on that in that I found one of research paper of Hong-yan WANG. He
found out that we can obtain the maximum energy when cantilever beam subjected to additional SDOF system. The additional
SDOF system is used to magnify the vibrations. The effects of the structural parameters of the SDOF elastic system on the
electromechanical outputs of the energy harvester are analyzed numerically. The accuracy of the output performance in the
numerical solution is identified from the finite element method (FEM). A good agreement is found between the numerical
results and FEM results. The results show that the power output can be increased and the frequency bandwidth can be
improved when the SDOF elastic system has a larger lumped mass and a smaller damping ratio. So by taking those parameters
into considerations my study is going to carry out.
Keywords: piezoelectric material, SDOF, vibrational energy. |
Cite this article: |
Yogesh S. Powar, A.M. Naniwadikar , "
An Overview of Disarray of cantilever beam bonded with piezoelectric material for energy harvesting application Subjected to single degree of freedom system" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) ,
Volume 3, Issue 10, October 2014 , pp.
019-022 , ISSN 2319 - 4847.
|
Full Text [PDF] Back to Current Issue  |
|
