Call of Papers for Current Volume **************** OnLine Submission of Paper

Title: THE PERFORMANCE OF WEAR RESISTANCE AND MECHANICAL PROPERTIES FOR THE TITANIUM NITRIDE

_____________________________________________________________________________

Title:
THE PERFORMANCE OF WEAR RESISTANCE AND MECHANICAL PROPERTIES FOR THE TITANIUM NITRIDE
Author Name:
M.Yugandhar, R.Satheesh, N.Sathish Kumar, G.Vidya Sagar, D.Pavan Teja
Abstract:
Three body abrasion in the present study, TiN–NiMo composites were remilled to particle size of 250–315 μm and used as reinforcements for NiCrBSi alloy by plasma transferred arc hardfacing process. The manufactured hardfacingalloy was characterised in terms of microstructure, mechanical properties and abrasive wear resistance. Depositionresults indicate good quality thick coating with uniform distribution of hard cermet (TiN–NiMo) particles in the matrix, minimum level of hard particle dissolution and low porosity of the hardfacing. Cermetparticles remain in initial form and consist of agglomerates (TiN and (Ti,Mo)C grains) embedded intoNi-based matrix. The mechanical properties of the TiN and (Ti,Mo)C phases measured by nanoindentation are very similar exhibiting a narrow distribution. The nano-scratching test reveals excellent bonding between the matrix and cermets in the hardfacing. No crack propagation was found in the interface matrix/hard phase region.The abrasive wear results ensure the promising features of TiN–NiMo reinforcements for Ni-based alloys. Produced coatings showed excellent performance under high-stress abrasion with wear values lower than for industrially used WC/W2C reinforced coatings.
Back